JNT-products slewing bearings

language:

Products

Rolling bearings

slewing bearings

Crossed roller bearings

Slewing Bearings
Slewing bearings is a kind of large-size bearing with special configuration which can bear axial load, radial load and tilting moment. Generally, a slewing bearing has mounting holes, lubricating holes and sealing system which can meet different needs of different machines under different working conditions.
JNT provides a full range of Ball or Rollen slewing bearings with internal, external gearing or without gearing.Normal or double holes, reduced or preloaded clearance up to precision quality class are available.

Design type:Four Point Contact Ball Slewing Bearing

Gear: with gear teeth on inner ring or outer ring,and without gear teeth.

Installing:slewing bearings with flange on outer ring or inner ring and bolt hole, and slewing bearings without flange.

available from stock

Four Point Contact Ball Slewing Bearing light series 20(As an alternative to VL-20)
Artikel Nr.	FLA 20	FLI 20	FLU 20
light series 20, lip seals on both sides,with / without centering external geared internal geared non-geared
pitch circle diameter of ball set	from 414 mm to 1094 mm	from 414 mm to 1094 mm	from 414 mm to 1094 mm
Four Point Contact Ball Slewing Bearing standard series 20(As an alternative to VS-20)
Artikel Nr.	FSA 20	FSI 20	FSU 20
standard series 20, lip seals on both sides with / without centering external geared internal geared non-geared
pitch circle diameter of ball set	from 414 mm to 1094 mm	from 414 mm to 1094 mm	from 414 mm to 1094 mm
Four Point Contact Ball Slewing Bearing standard series 25(As an alternative to VS-25)
Artikel Nr.	FSA 25	FSI 25	FSU 25
standard series 25, lip seals on both sides,with / without centering external geared internal geared non-geared
pitch circle diameter of ball set	from 755 mm to 1055 mm	from 755 mm to 1055 mm	from 755 mm to 1055 mm
Four Point Contact Ball Slewing Bearing (As an alternative to VA,VI,VU)
Artikel Nr.	FA	FI	FU
Four Point Contact Ball Slewing Bearing,lip seals on both sides,with / without centering external geared internal geared non-geared
pitch circle diameter of ball set	from 188 mm to 309 mm	from 288 mm to 420 mm	from 179 mm to 680 mm